advice on pleating / yardage

[Dutch piper]

Hi,
I'm about to make a kilt for a rather big fellow (hipsize 55").
He wants a kilt from the "henderson modern" tartan.
the tartan has a sett of 8,5 "



I can purchase extra fabric (say 4,5 yard double width) and pleat the kilt to the stripe.
Or as the customer suggested, pleat the kilt to the blue and the black stripe (so I would use half the sett).
That way I can use a normal kiltlength of tartan.

Does a kilt with a sett-size of 4,25" still make acceptable pleats?
They will be very shallow.
And does it look allright to make a kilt pleated to 2 different stripes alternately?

With kind regards from the Netherlands...
Dutch piper

[The Wizard of BC]

As a general rule of thumb - For a guy with a hip circumference less than 45" you would order 4 yards, double-width.
For a guy with a hip circumference between 45" and 50" you would order 4.5 yards, double-width.
For greater than 50" order 5 yards, double-width.

An 8.5" Sett is large but not excessively. The average is somewhere between 6.5" and 7.25".
I personally would not halve the Sett down to 4.25".

Also in general terms I would not alternate this Tartan as you suggest. It is not about the White stripe, it is more to do with the background Blue and Black. If a kilt is pleated to alternating stripes the backgrounds behind the stripes is usually similar.
Here you can see the pleating of a alternately striped kilt. This is from The Canadian Scottish Regt. It alternates Red and Yellow. But the background is very similar.

[Tarheel]

Now that the "Wiz" has posted a physical example, you could get your customer to look at the photo, imagine the blue and black stripes (vertical lines of the Henderson modern) as they show on the green.

I understand price is still a major factor in cases, as is carrying around a lot more material on one's body. I'm trying to think like a client here instead of a kilt maker.

[Taskr]

As a customer, I would be concerned with "they will be very shallow". Sounds to me that would make the kilt appear skirt-like and not have the swish and sway. For the additional cost of .5 - 1 yd, the customer might be far happier in the long run

[Benning Boy]

Figheadair's backside is seen in one of the kilt books covered by a kilt pleated to alternating stripes. I looks pretty good to me. I'd tell you which book, but the books are all in piles as we paint the library, and can't find the color pic on the computer now of it pic he sent me. But, it does look good.

[Dutch piper]

Thanks for you thoughts on this subject.
I decided to go for the extra yardage and pleat to 1 stripe.

regards,
Tómmes

[Barb T]

Just to add to the discussion - below, you'll see a pic of a kilt that I pleated to a yellow stripe with alternating green and black background color. This pleating was unavoidable because the tartan sett was nearly 17", and there was nothing that repeated twice per sett. I think it looks fine.

[Tartan Tess]

Just throwing this out there....most of the box pleated kilts I make are for pipers who have been parading, waiting all day. They love to put a box pleat on "after their work is done, to enjoy the rest of the games" and still be kilted nicely, but without the weight.