OK Folks... John Rickman here...

I know everybody here is going to start acting like Smiley up above when you hear my Explanation and Cure for the Dreaded Creeping Coat Sleeves !!! So here Goes...

The Cause ~~
Most Coats or Jackets out there have interior linings made of Silk of Rayon. These linings can, depending on the Dryness of the Outside Air, Generate Massive amounts of Static Electricity when the fabric of the Coat Lining is drawn back and forth across the material of the Shirt being worn. This Static Electric Charge produces an effect called Static Cling. Hence... Your Coat Sleeve Lining Clings to your Shirt and your Coat Sleeve won't drop back down when you straighten out your arm to normal.

The Cure ~~
Believe it or not, the Cure is Very Simple... Clothes Dryer Fabric Softener Dryer Sheets (Either Scented or Non-Scented / Your Choice)!!!

How to apply ~~
Before putting on your Coat or Jacket for your Outing, simply take one or two of these Fabric Softener Dryer Sheets and rub them all over your Shirt Sleeves from shoulder to cuff. Then put on your Coat or Jacket and enjoy your day Free of Static Cling and the Dreaded Creeping Coat Sleeves.

I know that it sounds Crazy but, This really does work !!! The Fabric Softener is the Trick to beating the Static Cling. Try It ~~ You'll Like It !!! It's also a good idea to stuff a couple of extra Dryer Sheets into your coat pockets so that you can re-apply the Fabric Softener to your Sleeves any time you may need it later during the day.

Here's to a Static Free Coat Sleeve Day !!! int: