My problem is the 4" wide (3" face plus two 1/2" seam allowances) strips for the outer faces of the box pleats. But now that I examine the fabric I have left, I think that I can salvage the apron sections and I think that I have enough to cut new pleat portions. wish me luck.

Thanks,
Christoph

Quote Originally Posted by Barb T View Post
If it's really skewed, just put each piece on your ironing board, square it up, and steam it. If you have trouble holding it square and pressing at the same time, just take some small all-metal sewing pins (not the ones with the plastic heads), and poke the pins straight down into the pad of the iron board.