Curse You Kilt Pin! - Preventing Kilt Pin Damage

[tpa]

I have a number of circular brooches with horizontal pins mounted off centre towards the top. That spreads the load through 2 pin holes instead of one. All have elastic on the pin, just in case. I also have magnetic ones which avoid the problem altogether.

I like Steve's idea of the 4" apron facings as any material attached solely to the pin simply adds to the weight of it and so will exacerbate the problem, although, it will may reduce damage from accidental pulling of the pin. At least, that is my take on it.

[MacCathmhaoil]

I’ve used these type of keepers for years and have never lost a pin of any type. My kilt pin, a 150 year old family heirloom, stays firmly attached and I never have to worry! The can easily be ordered on line and are quite inexpensive.
ACCF9462-E768-415C-A694-082DBD3E1C48.jpg

[Blaidd]

In a similar vein to when I wear miniature medals on uniform, I use a slice of rubber/eraser (depending on location )from the end of one of the disposable propelling pencils. It can be removed/reapplied with ease and one piece lasts for some considerable time.