|
-
13th November 06, 04:27 AM
#1
First Practice Chanter I bought was Pakistani. Much to my instructor's suprise, it tuned right in with his old blackwood chanter. I still have and use it, although I have since bought a nice Dunbar blackwood practice chanter that I take to lessons. The practice chanters seem to be more forgiving of, or maybe not subject to the erratic work standards that plague the pipes made in the mid-east, although I know of plenty of people who've had problems with cheap practice chanters. The problem may well be with the reed. If it's sounding flat, try removing a bit of the hemp from the bottom of the reed so it sits lower in the seat. That may sharpen it up a bit.
All skill and effort is to no avail when an angel pees down your drones.
-
-
13th November 06, 10:09 AM
#2
A few years ago my lady gave me a practice chanter for Christmas. She ordered it out of a catalog. I couldn't make it work for nothing....still can't.
There's a bagpipe shop up in Flagstaff http://www.thomsonbagpipes.com/ so next time up the mountain I took the chanter along and fully resolved to buy myself a 'good' chanter and learn to play it.
When I told my tale of woe to Jim Thompson, the owner, he asked me to bring in the chanter I had. When I did he played it magnificently and effortlessly.
Silly me, I'd thought it was the chanter's fault....
So, I'll leave learning the pipes to others and just enjoy the music.
Ron
Ol' Macdonald himself, a proud son of Skye and Cape Breton Island
Lifetime Member STA. Two time winner of Utilikiltarian of the Month.
"I'll have a kilt please, a nice hand sewn tartan, 16 ounce Strome. Oh, and a sporran on the side, with a strap please."
-
-
13th November 06, 10:52 AM
#3
okay river.... what was wrong with it!?
good luck
try changing out the reed that my help i dont know about smoothing the bore
-
-
13th November 06, 11:46 AM
#4
As Jim proved there was NOTHING wrong with the chanter....I just don't have the lung capacity, technique, or strength to make it work...
Flagstaff is 135 miles away so taking lessons there is not an option.
Ron
Ol' Macdonald himself, a proud son of Skye and Cape Breton Island
Lifetime Member STA. Two time winner of Utilikiltarian of the Month.
"I'll have a kilt please, a nice hand sewn tartan, 16 ounce Strome. Oh, and a sporran on the side, with a strap please."
-
-
13th November 06, 01:04 PM
#5
Make sure that you're blowing hard enough - the PC takes a fair amount of wind. (You might also try an easier reed.) Pushing the reed further into the chanter will also sharpen the sound.
-
-
13th November 06, 02:16 PM
#6
 Originally Posted by haukehaien
Make sure that you're blowing hard enough - the PC takes a fair amount of wind. (You might also try an easier reed.) Pushing the reed further into the chanter will also sharpen the sound.
My PC actually takes very little wind to play properly. Blow too hard and that is when funny things happen...
From what I have gathered.. The red Warnock reeds are easy to blow, and seem to work well in most PCs.. I use a Walsh right now, very easy to blow, good tone.. Gibson reeds are quite good, but require a good bit of air.... I have heard good things about Watson reeds, too...
Try a Warnock, you should be able to find them online for 6 bucks or less.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks