Hemming a Stillwater

[The F-H.C.A.G.]

For Christmas this year, I bought Panache a Stillwater Heavyweight Green Shadow Tartan kilt and we were very impressed by the length, swing, appearance in the sunlight, etc. Now, he had bought himself a Black Shadow Tartan previously and I couldn't help but notice that it was somewhat too long compared to the Green. We got out the handy tape measure-sure enough, 2 inches too long! He e-mailed Jerry, who said this had happened once before, but since he had owned it nearly a year before noticing the length, Panache certainly did not expect him to fix the problem. So, we decided it was time to hem. We checked with Panache's favorite tailor, who offered to hem it for about $30.00, and I (foolish immortal) thought to myself-I can do this, it's just a hem, right? Panache mentioned to me that many people are put off by the fact that Stillwater only does one length, and that hemming it strikes them as a difficult chore. So, here is the process.

Pictorial to follow.

Be well,

[The F-H.C.A.G.]

The first step, is to measure the hemming length. You can either measure where you are going to fold it, or where the current hem is going to be folded to.

Here, I did the former



And Smudge helped, as usual



Then, I must press the hem (I made sure the cat was not around for this-an iron on wool setting with lots of steam is unsafe for a cat)



Once pressed, pin at reasonable intervals (about 4-5 inches, or every pleat)



And, then you start to sew. I used a blind hem stitch. For those who don't know (and I didn't, until I looked it up in my Sewing For Dummies book), this is a hemming stitch that just picks up a few threads of the outer part of the garment, so it is essentially invisible from the outside. Some sewing machines can do this. Mine, ancient relic that it is, cannot. Therefore, I did this by hand.



A glass of wine helps this process.

More to come...

[Woodsheal]

In the old days, wool military uniform garments were often constructed with raw (unhemmed) edges. Civil War era frock coats, and regimental coats from earlier periods, almost all have raw edges on the bottom - not a hem, nor a selvedge. The wool is simply hacked off at the desired length and left unfinished.

Some of my reenactment coats have this raw-edged finish. The thing is, the wool holds that edge well, and does not unravel or fringe out, even after years of wear.

Why couldn't one simply cut the Stillwater heavy-weight wool kilt to the desired length and leave the bottom raw edge as is...?

[The F-H.C.A.G.]

So, I sewed



And, I sewed



And, I sewed



While Panache kept me in tasty beverages to cut the boredom.

Eventually, I began to get desperate



Even to the point of unmixed Drambuie



Just kidding! Realize that this was photographed over a nearly 2 week period. If I'd actually consumed all of these tasty beverages in one evening, I don't think it would have turned out as well.

Final pics to follow...

[Dreadbelly]

SO THAT IS HOW YOU KEEP YOUR HAIR ON FIRE!

Combustable fuel.

Really nice pictures, thank you.

[The F-H.C.A.G.]

After finishing the hemming, I needed to press the pleats back in



Then, Panache's favorite part, the after pictures





All in all, a slightly tedious process, but not difficult. I actually found it quite soothing.

Be well,

P.S. I did try to rotate these pictures, but after all those drinks, I couldn't seem to get Panache to stand on his feet.

[ccga3359]

So, I sewed

Just kidding! Realize that this was photographed over a nearly 2 week period. If I'd actually consumed all of these tasty beverages in one evening, I don't think it would have turned out as well.

Final pics to follow...

No I realize that the last four pictures with four different drinks you were wearing the same outfit. Ergo this was from the same sitting. So the question remains how did you keep the bloody hem straight after all of that imbibing ?

Oh nice work by the way.

[Panache]

The lovely Flame-Haired Celtic Amazon Goddess is a wonder. Not only does she support me in my whole kilt thing she actively helps me out. I am a very lucky fellow. It took her a few evenings but she was able to hem my Stillwater Heavyweight to the right length. If you have the time and initiative it makes a lot of sense to take in a SWK Heavyweight if their standard length is too long for you. You wind up with a great kilt and the hem is pretty hard to notice.

If anyone was interested, here is a before picture:



And here is the after picture (without me listing to the side):




Cheers

Panache

[ScottInNewHampshire]

Looks great F-HCAG! I know it can be a lot of sewing but like you I find it to be kind of soothing.

The length is SO much better. Looks great Panache. You make a great team. Congrats.

[BEEDEE]

F-HCAG - another outstanding pictorial tutorial, especially after I realized that the pictures had not been rotated and the the angles were simply a result of the demon drink!!

Might I suggest that Panache invests in a tripod for future photo shoots?

Brian