-
18th September 11, 08:10 AM
#1
Re: Kilt Pin, Anchor Weight Or True Pin?
Don't forget to put a piece of wide rubber band on the pin in back so you don't lose the pin. They do sometimes come unhooked and slip away without notice. Running the pin through a piece of rubber band on the backside prevents that. You'll notice a thunking against your leg if the pin comes undone - but it will still be there.
And, follow Ham's advice - one kilt pin per kilt and leave it in - that way there's less damage to the cloth. Also gives us the joy of kilt pin collecting/addiction.
Sort of humerous/sad to see posts about finding a kilt pin heavy enough to hold the apron down in a wind, or sewing weights into the bottom of the kilt.
All one needs is an underkilt/slip-like garment under the kilt and practice walking in the wind in various directions until you get used to, and comfortable with, the wind dancing in the kilt pleats.
Well, and learn to avoid updrafts if possible...
Ol' Macdonald himself, a proud son of Skye and Cape Breton Island
Lifetime Member STA. Two time winner of Utilikiltarian of the Month.
"I'll have a kilt please, a nice hand sewn tartan, 16 ounce Strome. Oh, and a sporran on the side, with a strap please."
-
-
18th September 11, 02:51 PM
#2
Re: Kilt Pin, Anchor Weight Or True Pin?
I like to wear a kilt pin that incorporates my clan crest in honor of my association with the Clan Douglas Society of North America.
My son and I each purchased one from the Scottish Tartans Museum. They look great and, if they help anchor the front apron even a tiny bit, that's just a another benefit. 
I own that I cringe a bit at puncturing the wool, but I try to push the pin between the threads as much as possible so as not to break any.
Riverkilt: Thanks for the tip about using a piece of a wide rubber band inside the apron. It's cheap insurance.
I changed my signature. The old one was too ridiculous.
-
-
6th November 11, 10:11 AM
#3
Re: Kilt Pin, Anchor Weight Or True Pin?
Readers
If you are as I am, you may not want to poke holes in the Expensive Wool just for 'show'. I have two heavy thread loops on my kilt, that the pin goes into, when I wear one. If I catch the pin on 'something' I am likely to tear the threads outs, and not rip a hole in the apron. The 'rip the apron' factor keeps me from wearing a kilt pin for all but 'classy' reasons(wedding,R.Burns night ect)
-
-
6th November 11, 12:02 PM
#4
Re: Kilt Pin, Anchor Weight Or True Pin?
 Originally Posted by Mr.Charles Anthony
Readers
If you are as I am, you may not want to poke holes in the Expensive Wool just for 'show'. I have two heavy thread loops on my kilt, that the pin goes into, when I wear one. If I catch the pin on 'something' I am likely to tear the threads outs, and not rip a hole in the apron. The 'rip the apron' factor keeps me from wearing a kilt pin for all but 'classy' reasons(wedding,R.Burns night ect)
Charles, I think that you are worrying unduly. Yes it might happen and it might happen on a Burns Night, or at a wedding or any classy event as well. If you think of all the things that could go wrong, then you would never wear it.
My kilt pins are poked between the threads, not through them. Take out the pin a quick rub - no hole.
Regards
Chas
-
-
6th November 11, 01:58 PM
#5
Re: Kilt Pin, Anchor Weight Or True Pin?
Well if legend, myth and rumour are to be believed... It's purpose WAS to hold the inner and outer apron together...
One of the many citations: http://www.gaelicclothing.com/kiltpins.htm
Personally I like the clan crest pins I have, so until I can afford a nice silver battleaxe one I'll be using them...
-
-
6th November 11, 02:09 PM
#6
Re: Kilt Pin, Anchor Weight Or True Pin?
 Originally Posted by madmacs
Well if legend, myth and rumour are to be believed... It's purpose WAS to hold the inner and outer apron together...
One of the many citations: http://www.gaelicclothing.com/kiltpins.htm
Personally I like the clan crest pins I have, so until I can afford a nice silver battleaxe one I'll be using them...
if you carefully read that passage again, you will see the it was NOT to hold the aprons together
-
-
6th November 11, 04:00 PM
#7
Re: Kilt Pin, Anchor Weight Or True Pin?
 Originally Posted by paulhenry
if you carefully read that passage again, you will see the it was NOT to hold the aprons together
Like I said... One of the MANY citations... 
http://www.scottishshop.ca/the-kilt-pin/
-
-
24th January 12, 06:20 AM
#8
Re: Kilt Pin, Anchor Weight Or True Pin?
I wear it for weight, especially since my kilt is pretty light and can get away from me on a windy day :o
I have been known to pin it together too (SORRY!)
-
-
24th March 12, 07:58 PM
#9
I thought the purpose of the kilt pin was to cause discussions regarding it's purpose on internet forums
-
-
24th March 12, 08:30 PM
#10
I have a Hiker Sport Kilt - 330 gm microfiber - super cool in the heat, but I use a 20 gram, 4 inch cross kilt pin on this one. Just call this fabric sail cloth because it does. Totally above my waist twice. I keep the pin on this one so I won't forget.
slàinte mhath, Chuck
Originally Posted by MeghanWalker,In answer to Goodgirlgoneplaids challenge:
"My sporran is bigger and hairier than your sporran"
Pants is only a present tense verb here. I once panted, but it's all cool now.
-
Similar Threads
-
By Cowher in forum General Kilt Talk
Replies: 14
Last Post: 6th March 11, 12:58 PM
-
By Detroitpete in forum General Kilt Talk
Replies: 21
Last Post: 17th February 10, 09:10 PM
-
By Kilted in Maine in forum General Kilt Talk
Replies: 2
Last Post: 7th June 08, 12:49 PM
-
By Riverkilt in forum General Kilt Talk
Replies: 18
Last Post: 21st December 05, 03:05 PM
-
By Alaskan in forum Kilt Advice
Replies: 17
Last Post: 25th March 04, 09:37 AM
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks