X Marks the Scot - An on-line community of kilt wearers.
-
11th August 11, 11:24 PM
#1
-
-
25th February 12, 06:21 PM
#2
Re: So you want to be an athlete?
... second that, good advice and gratitude for your sharing it!
-
-
12th July 12, 01:09 PM
#3
Thought I'd resurrect this thread - I use an 18" shoelace tied to a sparkplug socket to practice my footword and timing. My coach taught this to me. Works wonders!
-
-
19th July 12, 11:30 AM
#4
I made GGGP a super-lightweight practice weight.
one, 6-inch long, 4-inch diameter PVC plastic cylinder....two PVC plastic endcaps..... some PVC cement.
One 6-inch long, 3/8ths inch eye bolt. Extra washers and nuts.
I glued one of the end caps on to the PVC cylinder, and then when it dried, filled the thing with cement and a dozen lead wheel weights.
I drilled a 3/8th inch hole in the center of the other PVC cap and put the eye bolt in, with the threaded end sticking down....the eye is resting right on top of the PVC cap. I then threaded two sets of washers/nuts onto the eye bolt threads, cranked them down and locked them in place with JB Weld.
I then glue'd this PVC cap onto the cylinder. This pushed the washers and threaded end of the eye bolt well into the cement.
Wait 24 hours.....ready to throw. Total weight, with ring handle and rope to connect the two is about 8 pounds, or roughly half of GGGP's light weight for distance. This is perfect for practicing footwork, or to give to lady-friends or kids who want to try this throwing stuff. Total cost was about $25, plus the handle, and it looks cool. She hasn't told me that she broke it, yet, and it's been 3 months so I assume it's still going strong.
Last edited by Alan H; 19th July 12 at 11:33 AM.
-
-
19th July 12, 08:15 PM
#5
Will you please post a picture of this "tool" for me?
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks